Jump to CustomersLinton > Linton > Network

Network structure

Switches

Configuration backups

• Backups of the switch configurations are located at \\resources\itsupport$\Switch\ConfigBackUp[date]
• If you change a switch's configuration please make a new backup and place it into a folder in that area.

switch-core

• HP 5412zl2
• Version KB.16.10.0016
  • module A type j9536a
  • module B type j9534a
  • module C type j9534a
  • module D type j9534a
  • module E type j9537a
  • module F type j9546a
  • module H type j9546a
  • module I type j9538a
• 10.36.0.201
• In main server room
  • A6 - router
  • A21-A22 - 10Gb Trunk to switch-business
  • E1 - 1Gb uplink to switch-ictpe
  • E2 - 1Gb uplink to switch-room19
  • E3-E4 - 1Gb trunk to switch-mfl
  • E5-E6 - 1Gb trunk to switch-redzone
  • E7-E8 - 1Gb trunk to switch-sports (old fibres)
  • E17-E18 - 1Gb trunk to switch-atrium
  • E19-E20 - 1Gb trunk to switch-atrium02
  • G1-G2 - 10Gb trunk to switch-oldroom
  • G3-G4 - 10Gb trunk to switch-it1
  • I1-I2 - 10Gb trunk to switch-music

switch-business

• HP 5406zl2
• Version KB.16.10.0016
  • module A type j9986a
  • module B type j9990a
  • module C type j9550a
  • module D type j9550a
  • module E type j9550a
  • module F type j9550a
• 10.36.0.208
• In storeroom to left as you walk in
• Feeds rooms on floor above
• Feeds art and home economics directly
• Uplinked to switch-core A21/A22 from ports B21/B22 (10Gb)
• Management port F24

switch-ictpe

• HPE V1910-24G Switch Software Version Release 1518P01
• 10.36.0.215
• Located in portacabin between Art block and Sports Centre, in cupboard
• Uplinked via patch panels in Business Suite to port 28
• Management port 24

switch-room19

• HP 2530-24G-PoEP Switch (J9773A) (YA.16.02.0014, ROM YA.15.19)
• 10.36.0.213
• Next to fire escape
• Uplinked via patch panel in old server room to port 28
• Management port 24

switch-mfl

• HP 2530 48G-PoEP Switch (J9772A)
• 10.36.0.209
• Located in E1
• Uplinked to switch-core ports E3/E4 from ports 49/50
• Management port 48

switch-redzone

• 3Com Switch 5500G-EI PWR 24-Port Software Version 3Com OS V3.03.02s168p22
• 3Com Switch 5500G-EI 48-Port Software Version 3Com OS V3.03.02s168p22
• 10.36.0.204
• In the Red Zone office (ground floor of science block)
• Entire lower switch (48 port) is set as tagged for VLAN 70 (ATC guest network)
• Uplinked to switch-core ports E5 and E6 from ports 1/0/25 and 1/0/26
• Uplinked to science first floor 1/0/49 and 1/0/50 from ports 1/0/27 and 1/0/28 (old fibre)

switch-sci-1st

• 3Com Switch 5500G-EI 48-Port Software Version 3Com OS V3.03.02s168p22
• 10.36.0.205
• In science office
• Uplinked to switch-atc 1/0/27 and 1/0/28 from 1/0/49 and 1/0/50
• Uplinked to switch-sci-2nd 1/0/49 and 1/0/50 from 1/0/51 1/0/52 problem on uplink (port 51)

switch-sci-2nd

• 3Com Switch 5500G-EI PWR 48-Port Software Version 3Com OS V3.03.02s168p22
• 10.36.0.207
• Cupboard next to science prep room
• Uplinked to switch-sci-1st 1/0/51 and 1/0/52 from 1/0/49 1/0/50 problem on uplink (port 49)

switch-sports

• ProCurve Switch 2610-48-PWR (J9089A) (R.11.119)
• 10.36.0.206
• Behind Sports Centre reception desk in wall cabinet
• Uplinked to switch-core E7/E8 from ports 51 and 52
• Management port 48

switch-atrium

• 3Com Switch 5500G-EI 48-Port Software Version 3Com OS V3.03.02s168p22
• 3Com Switch 5500G-EI 48-Port Software Version 3Com OS V3.03.02s168p22
• 10.36.0.210
• In Atrium cupboard
• Uplinked to switch-core E17/E18 from ports 1/0/49 and 2/0/49
• Management port 1/0/48

switch-atrium-02

• HP 2530-48G-PoEP Switch (J9772A) (YA.16.02.0014, ROM YA.15.19)
• 10.36.0.212
• In Atrium cupboard
• Uplinked to switch-core E19/E20 from ports 51 and 52
• Management port 48

switch-atrium-cctv

• Unifi Edge Switch 24 LITE
• Provides DHCP address to clients on CCTV VLAN
• 10.36.0.223
• Ports 1-23 Untagged VLAN 55 (CCTV)
• Uplinked to switch-atrium 1/0/2 from port 24
• Management port 24 (doubles as uplink)
• Username for this switch is 'ubnt'

switch-oldroom

• HP 5406zl2
• Version KB.16.10.0016
  • module A type j9986a
  • module B type j9990a
  • module C type j9550a
  • module D type j9550a
  • module E type j9550a
  • module F type j9534a
• 10.36.0.203
• In old server room
• Uplinked to switch-core G1/G2 from ports B21/B22 (10Gb)
• Backup Xenserver on B23 for management bond (10Gb)
• Backup Xenserver on B24 for VM bond (10Gb)
• Backup Xenserver on F23 for IMM
• Management port F24
• Main hall AP connection is damaged on patch panel (76) - do not pull

switch-it1

• HP 2540-48G-4SFP+ Switch (JL355A) (YA.16.07.0003)
• 10.36.0.211
• Uplinked to switch-core G3/G4 from ports 49/50 (10Gb)
• Management port 46

switch-music

• HP 6100 24G 4SFP+ switch (PL 10.06.0100)
• 10.36.0.214
• In room near practice room
• Uplinked to switch-core I1/I2 from ports 25/26
• Management port 24

switch-itoffice?

• 3Com Switch 5500G-EI SFP 24-Port Software Version 3Com OS V3.03.02s168p22
• 10.36.0.221
• Not configured on VLAN as it's on the management network
• Gigabit Ethernet modules installed will not do 100MB, but ports 25, 26, 27, and 28 will do

VLANs

VLAN 1 - curriculum

• staff and student managed machines, etc.
• Untagged on most ports (A10-A12,A21-A22,B1-B9,B13-B23,D1-D24,E21-E24,F1-F8,H1-H8,Trk1-Trk8)
• 10.0.0.0/16

VLAN 2 - Guest wifi

• unmanaged, unfiltered guest devices
• Tagged on uplinks, proxy, firewall
• 10.2.0.0/16

VLAN 20 - Internet

• Should really be separate switch
• untagged A1-A5, tagged A6 for router
• Router, hypervisors (for VMs that connect directly to Internet, e.g. NetManager, NetScaler), proxy

VLAN 28 - Catering

• Never used in end as was not needed
• 192.168.200.0/24

VLAN 36 - Management

• Hypervisors, switches, everything that should not be accessible from any other network
• 10.36.0.0/24
• untagged A13-A20,B10,C1-C24

VLAN 40 - student wifi

• Untrusted student devices (MAC filtered)
• 10.40.0.0/24

VLAN 50 - staff wifi

• For personal staff devices, but currently unused (staff wifi on main LAN as need access to all curriculum resources)
• 10.50.0.0/24

VLAN 55 - CCTV

• CCTV NVRs and clients connected to that VLAN to access the NVRs
• 172.16.0.0/16
• DHCP handled by switch-atrium-cctv

VLAN 60 - VoIP

• 10.28.8.0/24
• NAT handled directly by router (so tagged on switch-core A6)

VLAN 70 - ATC

• Separate ATC network (segregated like guest wifi)
• 10.70.0.20/24