XenServer-Console
Jump To: Support > KB > Citrix > XenServer > Console
XenServer Console
The XenServer console looks like the following. You will see this when a monitor is connected to the physical server. If using the Console tab in XenCenter you should type xsconsole
from the command prompt.
From the console, you can easily view the server's management IP address details:
XenServer 6.0.2 15:23:35 xenserver01 +-------------------------------- Configuration -------------------------------+ | | | Customize System IBM | | System x3550 M3 -[7944K1G]- | | Status Display | | Network and Management Interface XenServer 6.0.2-53456p | | Authentication | | Virtual Machines Management Network Parameters | | Disks and Storage Repositories | | Resource Pool Configuration Device bond0 | | Hardware and BIOS Information IP address 10.0.0.101 | | Keyboard and Timezone Netmask 255.255.0.0 | | Remote Service Configuration Gateway 10.0.0.1 | | Backup, Restore and Update | | Technical Support Press <Enter> to display the SSL key | | Reboot or Shutdown fingerprints for this host | | Local Command Shell | | Quit | | | | | | | | <Enter> OK <Up/Down> Select <Enter> Fingerprints <F5> Refresh | +------------------------------------------------------------------------------+