Linton-CateringSystem
Jump to CustomersLinton > Linton > CateringSystem
Catering System
Switch ports
| Main Hall | |||
| Device | Wallbox | Switch | Switch Port |
| sQuid1 | 80 | Old server room 1 | 4 |
| sQuid3 | 79 | Old server room 1 | 3 |
| Till1 | 77 | Old server room 8 | 7 |
| Till3 | 78 | Old server room 8 | 35 |
| Atrium | |||
| Device | Wallbox | Switch | Switch Port |
| sQuid2 | AG75 | Atrium-02 (HP) | 35 |
| sQuid4 | AG71 | Atrium (3COM) 2 | 17 |
| Till2 | AG76 | Atrium (3COM) 2 | 35 |
| Till4 | AG70 | Atrium (3COM) 2 | 41 |
Obtain MAC Address
- Make sure there is a receipt roll in the device.
- Disconnect and reconnect the power cable to re-boot the terminal. Remember to remove the USB lead before removing the power cable and put the USB back in before powering back on.
- As the terminal re-boots, continually tap the "00" key until the OS Menu appears.
- Enter the Maintenance code "7509" and press the green button.
- Scroll down to menu option 7 "Information" and select by pressing the green button.
- The terminal config report is printed, the MAC address is the last item listed on the report.
- To restart the terminal scroll down to menu option 8 "Power" and select "reboot". The terminal and reader will return to the sQuid standby screen.